welding machine

  • Hot

    Co2 Gas Shielded Welding Wire

    Co2 gas shielded welding wire Co2 gas shielded welding wire are widely used for welding of steel structure in mineral machineries, engineer machineries,ships, bridges,pressure vessels, building constructions. Welding of other 500pa level carbon steel and low alloy steel, high-speed welding of light gauge plate and pipe line steel. Advantages: 1.The welding wire is steady to transfer wire. 2.The welding line is formed beautiful. 3.The welding fog and splash is little. 4. It has good fluidity and anti-crack resistance. 5. The welding slag is thin and easy to fall. 6. The welding line has good breaking strength and anti-low temperature impact resistant performance. 7. It is applied for welding of all- position and bigger electric current range.

    Email Details
  • MMA Welding Machine

    MMA Welding Machine MMA140/160/180/200GD Features: 1. Single board design 2. Single phase power supply. 3. MMA mode with VRD control. 4. Can be used as lift arc TIG. 5. With perfect over current, overheating, short voltage protection. 6. Small size, light weight, portable and easy operation for family users. Scope of application: MMA: 1. Welding consumables: Φ2.5-3.2mm Acid electrode Φ2.5-3.2mm Basic electrode 2. Welding thickness: MMA140-160A: 1.5mm-5mm steel MMA180-200A: 2mm-6mm steel TIG: Tungsten needle: 140-160 Φ1.6-2.4 180-200 Φ1.6-3.2 Gas: Argon gas MMA140/160/200 Features: 1. Adopt advanced 100KHZ high frequency inverter technology. 2. built-in arc force and hot start function, easy to start, high quality welding, small splash, good weld appearance. 3. With ability of automatic over-voltage, under voltage, over-current protection, safe and reliable. Scope of application: 1. Welding consumables: Φ2.5-3.2mm Acid electrode Φ2.5-3.2mm Basic electrode 2. Welding thickness: MMA140-160A: 1.5mm-5mm steel MMA180-200A: 2mm-6mm steel

    Email Details
  • Hot

    Low-Alloy Steel Welding Electrode

    Features: Low-alloy steel welding electrode is suitable to work in all position. It provides excellent usability and beautiful weld appearance, with good slag detachability, suitable for short arc welding. Applications: It is used for welding the Marine steels and other same grade strength structure, like vehicles, bridges and constructions, ect. Model: AWS E7015/E7016/E7018/E8015/E8016/E8018/E9018 Note: 1. The electrode must be baked 1-2 hours in 350℃-450℃ before using. 2. Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

    Email Details
  • MIG Welding Machine

    MIG Welding Machine MIG 135/155 Features: 1. Built-in 0.9kg wire spool. 2. MMA/MIG Mode 3. With output polarity conversion, can weld flux core and solid wire. 4. With perfect overcurrent, overheating, short voltage protection. 5. Under MIG mode. 6. Small size, light weight and portable. 7. Single phrase power supply for home use. Scope of application: 1. Consumbles: contact tip, nozzle, welding rod 2. Welding workplace: 1-4mm, carbon steel. stainless steel MIG 160/175/200GD Features: 1. 5kg and 1kg wire coil interchange. 2. 3 in 1 function, including MIG/MAG, MMA, Lift TIG 3. MMA mode with adjustable VRD control, usercan set; arc force can adjust seperately. 4. 2T/4T mode. 5. At MIG/MAG mode have voltage, current, inductance unified adjusting function. 6. With output polarity conversion. 7. With perfect over current, over heating, short voltage protection. 8. Current and voltage figure have seperate digital display. 9. Complete with spool gun connector. Scope of application: 1. Consumbles: contact tip, nozzle, tungsten needle, welding rod 2. Welding workplace: 1-6mm, carbon steel. stainless steel MIG 200/250/300GN 1. Built-in wirefeeder, equipped with cylinder tray. 2. MIG/MMA/LIFT TIG Mode. 3. MMA mode with VRD control. 4. With output polarity conversion. 5. Under MMA mode can be used as lift arc TIG. 6. With perfect overcurrent, overheating, under voltage protection. 7. Current and voltage figure with seperate digital display. 8. 3 Duct design( Waterproof, anti dust, anti corrosion). 9. The high rate of sustained load can be used for industrial users. Scope of application: Mig200/250/300: Φ0.6-1.2 flux-cored wire Mig200: Φ0.6-1.0 carbon steel wire,5/15KG MIg250/300: Φ0.6-1.2 carbon steel wire,5/15KG Consumbles: 200A: Φ2.5-4.0, acid electrode, basic electrode 250A/300A: Φ2.5-5.0, acid electrode, basic electrode Welding workplace: 1-6mm, carbon steel, stainless steel

    Email Details
  • TIG Welding Machine

    TIG Welding Machine TIG160/200D Features: 1. Adopt advanced 100KHZ high frequency inverter technology. 2. With TIG/MMA two functions. 3. Unique high frequency arc start, higher success rate of arc striking. 4. With ability of automatic over-voltage, under-voltage, over-current protection, safe and reliable. Scope of application: 1. Carbon steel, stainless steel 2. Tungsten needle: 140-160 Φ1.6-2.4 180-200 Φ1.6-3.2 Gas: Argon gas TIG 200/250/315ACDC Features: 1. Adopt advanced 100KHz high frequency inverter technology. 2. With TIG/MMA teo funtions. 3. With remote and panel conrol function, foot control is available. 4. With pre-flow and post-flow adjustment, current adjustment and clearance with adjustment. 5. Unique high frequency arc start, higher success rate of arc striking. 6. With ability of automatic over-voltage, under-voltage, over-current protection, safe and reliable. Scope of application: AC: Φ1.6-2.4, tungsten needle, Argon aluminum, Magnesium, Aluminum alloy and other non-ferrous metals Thickness: 1-4 mm DC: Carbon steel, stainless steel Thickness: MMA: 2-6mm TIG: 0.6-6mm

    Email Details
  • Plasma Cutting Machine

    Plasma Cutting Machine Features: Using V-MOS inverter circuit and TGBT switching elements, advanced circuit design, high efficiency, small size, light weight, good starting arc performance. High-speed, high temperature, high energy plasma gas follow to heat and melt the material being cut. The use of compressed air for industrial gases and exclude the molten metal stream, so as to achieve the purpose of cutting. Applications: 1. Aplly sheet cutting, cutting neat, smooth, small deformation, stainless steel and all kinds of metal material cutting is very convenient. 2. Suitable for cutting cabon steel, high speed steel, tool steel, stainless steel, copper, aluminum and most of ferrous and nonferrous metals.

    Email Details
  • DC Arc Welding Machine

    DC Arc Welding Machine Features: Using IGBT inverter technology, reached a high reliability; inverter of high frequency and energy saving; with adjustabe thermal arc, little splash, stable current, forming good degree, has good degree, has good pushing compensation function; swicth frequency us 20KHz, temporary-load rate is higher; it can be applied to various acids, alkaline welding rod; it has advantages of small volume, light weight, beautiful appearance, good corrosion resistance; a wide range of uses. Applications: It is applicable to high altitude abd field operation, interior decoration industry, a variety of mechanical metal material welding repair.

    Email Details
  • Hot

    Stainless Steel Gas Shielded Welding Wire

    Stainless steel gas shield welding wire Advantage: 1. Low welding costs. 2 High productivity and low electricity consumption. 3 Easy to operate. 4. All position welding. 5. Very low hydrogen content in the weld and lower nitrogen content. 6. Excellent crack-resistance. 7. Little deformation after welding. 8. Wide applicability. Suitable for welding thin, medium and thick plates.

    Email Details
  • Multifunctional Digital Pulse Welder

    Multifunctional Digital Pulse Welder CT312/416GD CT416 Features: 1. 3 in 1 function, include CUT,MMA, and HF TIG. 2. MMA mode with adjustable VRD control. 3. With perfect over current, over-heating, under voltage protection. 4. Current digital display. 5. Pressure adjustment and indicate on panel. 6. Single board design. Scope of application: Cutting thickness: 30A: 10mm, carbon steel, stainless steel 40A: 12mm, carbon steel, stainless steel MMA: Φ2.5-3.2mm, acid electrode, basic electrode Φ2-6mm, carbon steel, stainless steel TIG: Φ1.6-2.4mm, tungsten needle Φ0.6-4mm, carbon steel, stainless steel

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)