Welding Electrode

welding wire welding machine welding rod

  • Hot
    Carbon Steel And Mild Steel Welding Electrode

    Carbon Steel And Mild Steel Welding Electrode

    Features: Carbon steel welding electrode is suitable to work in all position with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking and restriking arc.

    Applications: It is used for welding common carbon steel structure, suitable for small thin plates and low-alloy steel, such as 09Mn2.

    Model: AWS E6010/E6011/E6013/E6018/E7014/E7024

    Note: No need to bake before using, but please bake 30-60 minutes in 150℃ if the electrode is humid.

    Email Details
  • Hot
    Low-Alloy Steel Welding Electrode

    Low-Alloy Steel Welding Electrode

    Features: Low-alloy steel welding electrode is suitable to work in all position. It provides excellent usability and beautiful weld appearance, with good slag detachability, suitable for short arc welding.

    Applications: It is used for welding the Marine steels and other same grade strength structure, like vehicles, bridges and constructions, ect.

    Model: AWS E7015/E7016/E7018/E8015/E8016/E8018/E9018

    Note: 1. The electrode must be baked 1-2 hours in 350℃-450℃ before using.
    2. Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

    Email Details
  • Hot
    Stainless Steel Welding Electrode

    Stainless Steel Welding Electrode

    Features: Stainless steel welding electrode has good machanical property, intervryctaline corrosion-resistance, excellent operating properties, suitable for all positions. Applications: Stainless steel welding is used for welding 0Cr19Ni9, 0Cr19Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300℃, surfacing stainless steel welding electrode. Model: AWS E308-16/E308L-16/E309-16/E309L-16/E309MoL-16/E310-16/E312-16/E316-16/E316L-16/E318-16/E347-16/E410-16 Note: 1. The electrode should be baked 1 hour in 300℃-350℃ before using. 2. Welding in short arc, and swing scope should not excess2.5 times of the electrode diameter.

    Email Details
  • Hot
    Cast Iron Welding Electrode

    Cast Iron Welding Electrode

    Features: Cast iron welding electrode with excellent crack resistance and processability, can work with AC or DC power, stable arc, electrode without becoming red, easy for operating.

    Applications: Cast iron welding electrode is suitable for repair welding on thin cast iron pieces and machined surfaces, such as some key grey cast iron pieces like engine bearers, guide rails of machine tools, pinion stands, etc.

    Model: AWS ECI/ENi-CI/ENiFe-CI/ENiCu-B

    Email Details
  • Hot
    High Strength Steel Welding Electrode

    High Strength Steel Welding Electrode

    High Strength Steel Welding Electrode Features: High strength steel welding electrode is suitable to work in all position with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking and restriking arc.

    Applications: It is used for welding low-alloy steel with corresponding grade of strength.

    Model: AWS E7015/E7016/E7018

    Note: 1. The electrode must be baked 1-2 hours in 350℃-450℃ before using.
    2. Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

    Email Details
  • Hot
    Hardfacing Steel Welding Electrode

    Hardfacing Steel Welding Electrode

    Hardfacing Steel Welding Electrode Features:
    D147
    Normal low-mild allooy surfacing welding electrode. It can be used to repair various carbon steels surface and carbon steel track swich.

    D507
    Applicable in value sealing face, axle, mixer paddle and valve of carbon steel or alloy steel, the operating temperature is below 450℃.

    D517
    High Cr steel surfacing welding electrode. It can be used for surfacing welding value sealing surface, axle, mixer, blades of the screw conveyer.

    D217
    Good abrasion resistance accompanied with medium impact, applicable in remedying shovel tooth, bulldozer blade, bucket, crane wheel,cutter blade and etc.

    D707
    The weld metal contains tungsten carbide, applied in the welding of overlay of rock strong wear resistant, such as earth mover, concrete agitator, etc.

    D802
    Co-Cr-W alloy, flux-cored Co based surfacing with electrode, surfacing metal can be kept good property of wear resistance and corrosion resistance when operated at 650℃.

    Email Details
  • Nickel Alloy Welding Electrode

    Nickel Alloy Welding Electrode

    Nickel Alloy Welding Electrode Features: Nickel welding rod is a kind of titanium-calcium type pure nickel welding electrode, with good mechanical property and high heat-resistance and corrosion resistance. It can be used in both AC and DC welding.
    Nickel alloy welding rod is a kind of low-hydrogen monel alloy electrode. used for welding monel alloy metals and dissimilar steels.

    Applictions: Nickel Alloy Welding rodiused for welding nickel and nickle alloy metals.

    Note: 1. The electrode must be baked 1 hour in 150℃ before using.
    2. Hammer the bead can relieve stress of weld parts to avoid crack.

    Email Details
  • Hot
    Tungsten Electrode

    Tungsten Electrode

    Tungsten Electrode Features: high melting point, low arc ignition, good arc stability, non-consumable. Tungsten electrode added 0.15-4% ThO2, CeO2, La2O3, ZrO2 which can reduce the burn-off rate of electrode, prolong its service life, not pollute the welding seam, increase launching ability of tungsten electrode with excellent welding appearance and quality.

    Applications: electrode for TIG welding and plasma welding, cutting, spray-coating and smelting.

    Main products: Black or ground electrode of Thoriated tungsten, Cerated tungsten, Lanthanated tungsten, Ziraconiated tungsten, Pure Tungsten.

    Diameters Range: 1.0-12.0mm

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)